pouch cell, like 2600mah or so depending on revision. Not user friendly to swap, you basically have to desolder the tabs
What does flashing red vs solid red mean on a Blendjet?
- Thread starter Thomas Martinez
- Start date
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
pouch cell, like 2600mah or so depending on revision. Not user friendly to swap, you basically have to desolder the tabs
i had one that flashed red and turned out the button itself was stuck halfway pressed. Cleaned around it with isopropyl and it was fine. Seperate issue from the battery entirely
i had one that flashed red and turned out the button itself was stuck halfway pressed. Cleaned around it with isopropyl and it was fine. Seperate issue from the battery entirely
That's actually a really common one. Smoothie residue gets under the button membrane and it reads as a constant press, then the controller throw an error because it thinks you're trying to start it without a cup.
lol "charge it and see" is the universal repair forum advice for anything with a lithium pack
because 9 times out of 10 it works. The 10th time you replace the whole device
update: left mine on the charger for 6 hours and now its solid red instead of flashing. Progress??
update: left mine on the charger for 6 hours and now its solid red instead of flashing. Progress??
yeah thats actually good. Solid red usually means its registering the battery again. Let it keep going till the light changes color entirely.
yeah thats actually good. Solid red usually means its registering the battery again. Let it keep going till the light changes color entirely.
why does it switch from flashing to solid as it charges though, whats the logic there? you'd think it would just go straight to solid