on spirit the lower board is the motor controller. On spirit its one unit. Console up top, MCB down below.
Spirit treadmill dead, no power at all, what's the usual culprit?
- Thread starter Thomas Martinez
- Start date
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
on spirit the lower board is the motor controller. On spirit its one unit. Console up top, MCB down below.
hot take but treadmills are a waste of money just go run outside
cool story, not helpful
For Spirit treadmills the order is outlet (non-contact tester), power cord at both ends, rocker switch with a continuity tester, then the safety key. If all that fails then the inline fuse on the lower deck for XT/CT models, the thermal reset on the motor for XT685 model, or the lower board itself.
Spirit treadmills are some of the most well built treadmills on the market so when they do develop an issue it’s usually the cheaper parts that fail first.
Spirit treadmills are some of the most well built treadmills on the market so when they do develop an issue it’s usually the cheaper parts that fail first.
For Spirit treadmills the order is outlet (non-contact tester), power cord at both ends, rocker switch with a continuity tester, then the safety key. If all that fails then the inline fuse on the lower deck for XT/CT models, the thermal reset on the motor for XT685 model, or the …
sole bashing is unwarranted, my f80 has been running 9 years no issues
sole bashing is unwarranted, my f80 has been running 9 years no issues
9 years and you havent replaced the belt? doubt
9 years and you havent replaced the belt? doubt
belt yes obviously, talking about electronics. Learn to read
the cheap yellow harbor freight ones are fine for this stuff. Dont stick it in a 240v panel and youll be ok
ok ordered a multimeter, what should I test first when it gets here
ok ordered a multimeter, what should I test first when it gets here
outlet first with the probes in the power slots. Should read 120 or so. Then unplug treadmill and test the power cord itself. Then the rocker switch. Work from the electrical outlet towards the lower board.
the fuse in the power plug is another common one on UK treadmills. I helped my brother in law troubleshoot his for like 2 hours over the phone before I realized it was just a 50p fuse in the power plug. He was ready to bin the treadmill.
the fuse in the power plug is another common one on UK treadmills. I helped my brother in law troubleshoot his for like 2 hours over the phone before I realized it was just a 50p fuse in the power plug. He was ready to bin the treadmill.
lmao classic