What do the different flashing light colors mean on a Ninja Blast?

[Thomas Martinez]

found this while reading about a Ninja Blast portable blender that wont turn on. I figured I'd toss this out there as other has seen this same issue.
According to manufacturer, there are four reason the device will not turn on. When first troubleshooting, the LED will flash to tell you an issue.
If the LED flash red the battery is too low to power on. Flashing yellow indicate the jar isnt properly aligned with base. Flashing orange indicate the blade are jammed with an object. If the battery itself is going bad the voltage will read low and you will need to replace the 18650 cells.

 

[Shiny Shark]

opened mine last summer, it was 2x 18650s in series and honest the cells tested fine. Ended up being a cold solder joint on the switch board. Spent like 3 hrs for nothing lol

 

[British Un]

Yellow for alignment are the big one imo. Half the thread I see on the ninja subreddit involve people slamming the jar down but not twisting it until it click.