See a writeup on how to fix the grinder on DeLonghi machines when it stop spinning. Thought it would of worth getting opinions from others who have done this.
Take the machine apart and find an orange rubber ring on the grinder. Remove the ring and the white bracket that hold the grinder. Remove the center screw by turning it clockwise (counter intuitive). Remove the blade and clean it. Put the blade back in place and tighten the center screw going at the opposite direction (anticlockwise). Replace the rubber ring and white bracket. Ensure there is no coffee ground or other foreign object trapped in the grinder. If it still will not spin then the grinder motor is likely broken and need to be replaced.
Out of curiosity, how often does the grinder fail due to motor issues vs. Buildup of ground coffee? I imagine the reverse thread for the center screw is a common point of frustration for new machines. Is there a good place to get replacement grinder motor for DeLonghi coffee machines? Have any of you performed these steps to fix the grinder issues on your DeLonghi coffee makers?
Take the machine apart and find an orange rubber ring on the grinder. Remove the ring and the white bracket that hold the grinder. Remove the center screw by turning it clockwise (counter intuitive). Remove the blade and clean it. Put the blade back in place and tighten the center screw going at the opposite direction (anticlockwise). Replace the rubber ring and white bracket. Ensure there is no coffee ground or other foreign object trapped in the grinder. If it still will not spin then the grinder motor is likely broken and need to be replaced.
Out of curiosity, how often does the grinder fail due to motor issues vs. Buildup of ground coffee? I imagine the reverse thread for the center screw is a common point of frustration for new machines. Is there a good place to get replacement grinder motor for DeLonghi coffee machines? Have any of you performed these steps to fix the grinder issues on your DeLonghi coffee makers?