Search results

You can do either. If the divider is in the machine it will limit the appliance to zone 1 and 2 but if you remove the divider it will allow it to go into megazone mode. There’s a little sensor on the machine that detects the position of the divider.

volume is volume. The flowmeter measures pulses not time so it doesnt matter if its hot or cold. The shot will taste different depending on the temperature but the amount will remain the same.

alot of people are unaware the fuse in the molded power plugs can fail without showing any visual sign of failure. People have to actually physically pull the power cord and test the fuse with the multimeter or simply replace the fuse with a new one.

Worth noting that the FlexDrawer model has a different button sequence because it comes with a removable divider that allows you to use the machine as one giant air fryer. Instead of using 1 or 2 you use the MegaZone button. The rest of the functions are the same though.

the standard ratio for jasmine on the stove is 1:1.5 just like in most thai households. You got that backwards. 1.25 is for rice that is already soak in water

Regarding the OP's question. For about 80% of the time a new fuse will do the trick. For the remaining 20% it's usually a thermostat or relay issue causing overcurrent or overtemp. If the fuse blows within minutes or hours of use then the same issue exists. If the new fuse lasts for weeks or...

is there any app you can use to see the percentage of battery left instead of watching the ring?

all this talk about grease and nobody mentioned unplugging the dang treadmill. Ive seen too many treadmills with fingers getting pinched because people didn’t unplug from the power source before putting a finger into the incline motor.

Worth mentioning that Spirit treadmills draw a LOT on startup so if you have it on a 15A circuit with anything else that could be a trip. Dedicated 20A circuit is what the manual asks for and most people ignore it.

If you're that concerned about portion size just buy the boxes that state 8 servings and divide the pasta by 8

so does anyone know if you can use the blast jar with a regular usb-c pd charger or does it have to be the cable that came with it? I lost the cable and

Always buy extra lemons.

wait does the purple light stay on while blending or does it pulse? Mine seems to pulse when I use heavy loads in the blender.

can you open these up?

yeah preset cook program are in rom not ram, you cant wipe those with a reset, theyre baked into the firmware. Only user-set stuff like clock and pending timer go away.

so if I plug it into my laptop it will take forever to charge?

The biggest issue with the Magnifica model is not the volume of coffee but rather its set grind and tamp pressure. No matter how much you can program the machine to dispense, if the coffee puck is not properly tamped, your coffee will taste like dishwater.

Does the blue ring segment by segment when charging or does it just blink until its done?

For these machines the reset is to hold the two buttons for 5 seconds. It beeps and that’s it. Costs nothing to try and works occasionally to fix pump issues.

clock is in volatile ram on basically every sharp ive seen, no battery backup, no eeprom for times. Thats why power cycling kill the clock too.