Search results

  1. E

    Anyone know the trick to opening a Kitchen Mama can opener?

    OP nailed it. The trim on the front has 6 clips total, 2 on each of the long edges and 1 on each end. The clips on each end will snap on the side when you go to pry it open.
  2. E

    Steamboat cooker dead, is it usually the fuse in the controller?

    9 times outta 10 its the thermal fuse on the element side actualy, not the controller fuse. People miss it cuz its tucked against the heating plate with a little metal clips. Controller fuse blowing usually means something downstream shorted.
  3. E

    DeLonghi pulling cold coffee usually the heater fuses?

    You can jump the fuse but only for a few seconds while the machine is running. Dont leave it jumped on the coffee machine otherwise you'll violate the safety cutout.
  4. E

    DeLonghi pulling cold coffee usually the heater fuses?

    One is the operating thermostat to allow it to reset. The other is the one shot safety fuse. The one that resets could be the one that is faulty if it had tripped.
  5. E

    DeLonghi pulling cold coffee usually the heater fuses?

    Usually on the fuse itself. 184C or 192C depending on which one there is. If too charred to read then simply pull the model number off of the heater and look it up.
  6. E

    DeLonghi pulling cold coffee usually the heater fuses?

    9 times out of 10 its the fuse. I've done 15 of these and only one where it was the element that failed. The fuse is a sacrificial part of the machine.
  7. E

    Is it worth it to convert my whole house to heat pump?

    Been a heat pump user for several years now – all I can say is it’s really awesome compared to traditional gas. What can I say? Hm… cost-efficient, quiet, and really good when it comes to cooling and heating.
  8. E

    What’s better – Staining or natural oak look?

    Have you ever consider light stain? Subtle yet enhances the grain of the wood without overdoing it, I think this is what you need right now.
  9. E

    Beware of Kobalt warranty

    Probably you could try another lowes? it sometimes depend on the staff from store to store
  10. E

    Anyone who likes to discuss about their favorite vintage tool brands?

    Well, North Bros sounds best for me. No one can beat their durability, built like tanks and quality materials, their solid mechanism works like a dream. Vintage are more better compared to the new ones, they aren’t built as good as their vintage tools.
  11. E

    Need suggestion for water heater

    on top of that, it is not that much pricey.
  12. E

    Need suggestion for water heater

    I’m with pokemon co with this, even buying some tools would cost you around $100.
  13. E

    Better option between Oxyacetylene or Plasma Cutter?

    Generally, plasma cutters are faster, much safer, and much cleaner but not with thick slabs. I think oxypropane setup is much safer and readily available compared to oxyacetylene not to mention it is also cheaper.
  14. E

    How to remove glued plywood from the floor?

    An oscillating multi-tool with a scraper blade is a helpful tool specially for very strong glue. As a carpenter, this tool is very helpful for separating wood layers and will keep the damage to bare minimum.
View older results
Top Bottom