Search results

The thigh side of the half chicken is never the bottleneck in the cook times. The breast will dry out before the thigh side of the chicken. Probe the breast at 70c and pull the chicken out.

wait why does the hollow center matter for expansion? doesnt water still just soak into the pasta walls the same way

how wild is it that we are discussing flowcharts for coffee machines like they are cars?

$5 ring vs a new PCB lmao yeah ive seen this exact thing on the facebook groups. People throwing away perfectly good units. Last year i grabbed two off the curb, both needed rings. One had a stuck float pin from gunk. Cleaned them up and gave one to my sister. The build quality on the older...

Smell test. If after three meal it smells like chili it’s done absorbing all the crap and it’s time for a new ring.

chest strap gang rise up

salting the water for steaming actually does something? I thought that only worked for cooking stuff that was submerged in the water.

wait so if it's a flat timer does that mean the time the water takes to reach a boil counts against the steam time? So the 5 minutes is not necessarily 5 minutes of actual steam?

opened the top panel. 4 screws under the water reservoir area. Membrane is glued to the machine but can be peeled off to clean with isopropyl. Had coffee residue under there from a spill years ago apparently.

had one where the set time button was actually broken for an hour while i was trying to figure out how to time out of the machine. Was a dead membrane switch under the button.

The silicone hoses are reusable but the crimp clamps on the boiler are not. Have the squeeze clamp type replacements before you start playing with the boiler otherwise you'll be dealing with half-open machine for amazon.

You're missing a step. Remove the water softener filter (located on the lower right side) and drain the tank of any remaining water before adding the descaler. Otherwise the descaler will be diluted. Use a container of at least 1.5L capacity because the water will overflow the container if its...

Yes, but be careful. I did this with an iCharger to fix two dead 4ah packs. Set the iCharger to 5S liion and connect the balance pins accordingly. Minus to balance ground, C1-C4 to C1-C4 and plus to the top of the charger. Start it at the lowest charge rate. Check the cells. If any of the cells...

Lose the spade connectors on the switch. However, I do agree with the interlock switch wearing out before the on off switch.

Zojirushi gang stay winning

interesting, so chervon rolled there own? thats annoying. Guess ill hook up the saleae this weekend and see what falls out. As far as polling the battery, its either constantly or only at the time of startup of the tool, correct?

Threw mine in the trash and bought a Zojirushi. Life is too short.

fair enough i guess

Why are we taking apart 25 dollar crockpots in 2024

plastic spudger and a lot of swearing is the official delonghi service manual lmao